Audi 80 Car sound project
Time to set some sound in one ancient vehicle produced by the Germans - Audi 80.
The project get some time and as final result can be described as.. working well
MG995 and SG90 Servo 3D models
As images show, that are 3D models of full set MG995 / SG90 servo. If you can use STL or IGS files, feel free to download:
download MG995 Servo 3D models.
Inside are as separate files for all parts shown on the picture. Enjoy!
custom power supply from PSU
That is my version over the PSU to custom power supply theme. Found some old 350W “junk”, bought some cable ends and 4mm standard female banana connectors and here we go.
Ford Fiesta : driver`s door lock fix
In one of this days I drop on to small problem with one fiesta. To be more specific year 2001, driver`s door.
The problem: if you keep the central lock fuse on place door motors run into lock..unlock..lock..unlock mode without stopping. As additional bonus lock barrel do not rotate smooth on both sides. Doh! What I have done? Here:
Parkside Cordless Drill battery fix
Someone else with Parkside Cordless Drill issues? Well, if the answer of that quiz is YES or NO here is one case that I manage to find easy simple solution for. And hope it will be in some use to you also.
Android phone control RGB light
That is my second post about that topic, but this time thanks to that wonderful website MIT APP INVENTOR, I do not need to use serial application from others but to have fun building my own. Here is the project:
MIT App Inventor 2: sniffing 433Mghz commands
That is one study/project that dare to share in my small web space. It`s based on that remarkable RCSwitch arduino library and MIT App inventor website. So, what`s the story? I have few plip remote units left, working on that 433Mhz frequency. And said: hey, why not to control something with them using arduino..
Hyundai Gtez - Brakes replacement [ABS]
Ok, if you drop on that top, you`re searching for how to article I guess. So, here are my few cents in the jar.
What your Hyundai Gtez have you can check here: https://hyundai.cata … ang:en;catalog:eur}
Well, I presume you`re located in some place in Europe. Have no clue is that website work on US/Asia models.
Be carefull because there are Getz models WITH and WITHOUT abs systems. That one was WITH, so the disk, and the drums where different than normal one. But, of course you can remove the wheel and see if there is cable to sensor or not and that will give you the andswer what you need.
The time it cost me all that work was about 3h and I was really lazy, so perhaps for you it will cost maybe 2-2.5h.
What you need:
- socket 12mm (for the caliper hub) , socket 17mm (for the hub bracket) , 10mm socket for the bleeding nipples.
- and other standard things as copper grease, break cleaner, gloves, screw drivers and so on..
Megane Mk1 - Instrument cluster backlight replacement
What about change into the megane`s cluster backlight? OK? Let`s do that..
Removing that instrument panel is easy - top speakers out, remove two screws and pull top part toward you. Then three screws keep that panel to the body. Unplug two connector and that is - dials out. Then you`ll figure out. Small metal fork will help for the arrows. Then what?
Xantia tank overfill pipe [fix]
Problem: one day after fuelling to the top, I found out on the parking lot that under the car start forming fuel lake.
Baaad. The problem was that overfill pipe or what ever name it hold :