Sunday,18-January-2015
Xantia II - Parking sensors
EN
Device is from ebay, and work quite nice. For the price tag I`m more than happy with it.
What to do:
- remove rear bumper: that will cost little effort by removing all screws under rear fenders what keep it(if remember right was 2), inside the trunk, behind box compartment(2×10mm, if remember) and all other visible in the trunk area.
- already removed, you can see ready prepared channels for cables. In my case there was hole under left stop/indicator unit, and from there it goes inside horizontal profile right behind the trunk end. Unfortunately that mean you need to put the unit on left side and pull one wire to right because there is the reverse lamp signal wire, or to put it right side and extend the sensor cables(equally). Or like me.. just to drill hole where you need it 
So, here is some pictures from the main event:
